Results 1 to 3 of 3
Thread: substrate with "hills"
07-08-2012, 12:32 AM #1Junior Member Guppy
- Join Date
- Jul 2012
substrate with "hills"
I just got a new 135 gallon tank, dimensions are 48" x 24" x 27" high. I've
been doing a lot of research and will do the fishless cycling after putting
down the substrate. Since I have a lot of bottom area to work with, I'd
like to create a couple of mounds or hills - one in the back left, and one
somewhere left of center.
I was thinking of putting flourite down as a base of the mounds, maybe 2"
thick or so, but only where I want plants to be. Everywhere else, there would
only be gravel (med. course), about an inch thick, and then an additional
inch of gravel or so over the flourite. This way I can limit the vegetation to
only be on or around the hills, and not get an overgrown jungle effect
everywhere in the tank.
I would also like to use some rocks to form edges to these hills in places.
My questions then, are, will this work, and would there be any danger of
creating dead spots where harmful anerobic (sp?) bacteria could grow?
And also could I still sufficiently siphon clean the gravel without clouding
up the water or disturbing plant roots?
07-08-2012, 12:38 AM #2
I would think you could make hills by using rocks to hold the substrate in place making a higher level. I've never tried it but it sounds like it would work
You can still siphone the substrate around your plants. You just have to be careful not to go very deep or you would stress the roots and plants. It take a little practice but it can be done. I clean my gravel up to about 1 to 2 inches away from the plantIf you take your time to do the research FIRST, you can successfully set-up and keep ANY type of aquarium with ease.
"Not using a quarantine tank is like playing Russian roulette. Nobody wins the game, some people just get to play longer than others." - Anthony Calfo
Fishless Cycle Cycling with Fish Marine Aquarium Info [URL="http://saltwater.aquaticcommunity.com/"]
07-08-2012, 12:47 AM #3
You can use strips of thin plastic of varying heights to prevent the substrate from slipping and flattening. They are inserted vertically into the substrate. The plants will soon grow over and hide them from view. To prevent anaerobic pockets from forming, a plastic skewer inserted into the deeper areas every week or so will do.
I have added a crudely drawn picture to illustrate.
Last edited by Aeonflame; 07-08-2012 at 12:59 AM.