Thread: Heater Help
04-29-2012, 06:01 PM #1
I am thinking about purchasing a new 50 gal but the cost of the Aqueon Pro heater for that alone is hefty... so I'm wondering if I can't just combine a 50 w pro heater from my 10 gal and a 100 w pro heater from my 20 gal. Would using both of those in one 50 gal tank safely work?
04-29-2012, 06:23 PM #2
Depending on the temp in your house, a 150 watts may or may not be enough; however, using two slightly smaller heaters is always better than one larger heater. In the event of a heater failure, the other heater will hold enough temp to keep the fish unharmed until you can get a replacement.Knowledge is fun(damental)
A 75 gal with eight Discus, fake plants, and a lot of wood also with sand substrate. Clean up crew is down to just two Sterba's Corys. Filters: continuous new water flow; canister w/UV, in-tank algae scrubber!! Finally, junked the nitrate removal unit from hell.
For Fishless cycling:http://www.aquaticcommunity.com/aqua...ead.php?t=5640
04-29-2012, 07:16 PM #3
Good to know! I need to heat the tank no more than 10 d f at most so I'm thinking the two heater set up might work after all. Thanks!
04-29-2012, 08:30 PM #4
Amazon has the fluval m heater for about $20 depending on the watt. I have 2 of these and have no issue.
04-30-2012, 09:40 PM #5
First, do you need a heater at all?
Much of California doesn't.
During the day, wild water warms and cools at night. Fish can handle a range of temperatures. It's extremes that usually cause issues.