Results 1 to 3 of 3
Thread: [Question]DIY PVC Overflow Mod
09-12-2011, 10:34 PM #1Junior Member Guppy
- Join Date
- Sep 2011
[Question]DIY PVC Overflow Mod
I read this article on building DIY PVC Overflow
I would like to modify the above design to two intake attached to one reserve.
E.G. 2 BLUE PVC to 1 YELLOW PVC
Will this work? Any advice would be appreciated. Thanks!
09-13-2011, 11:25 PM #2
Are your trying to increase the flow ?
Having a second intake will not allow you to increase flow at all unless you increase the size if the piping were the blue vertical intake tubes meet the horizontal blue pipe
"Not using a quarantine tank is like playing Russian roulette. Nobody wins the game, some people just get to play longer than others." - Anthony Calfo
Fishless Cycle Cycling with Fish Marine Aquarium Info [URL="http://saltwater.aquaticcommunity.com/"]
09-14-2011, 12:08 AM #3
0Originally Posted by Cliff
Are you doing this as a backup in case one gets clogged? That would make sense, though with a well designed prefilter, it wont be a concern.
Or you can just do two overflows, one in each corner.Who is "General Failure" and why is he reading my hard drive?