Results 1 to 6 of 6
05-06-2013, 12:44 PM #1
Bubblers driving me nuts! Wetness at back of tank!
I have just recently switched back to my bubble wall with the fine mist bubbles. I love the look of it. However I get wetness at back of my tank on the outside and it makes the background look patchy and horrible and also not good for the wall etc. I have some open at the rim of tank so have tried to use foil etc. to cover the spot however as the 'mist' is so strong it is not sucessful. I have about given up!
Any suggestions I havn't thought of?
Thanks a ton.
PS - it is my 29 gallon freshwater with barbs.
05-06-2013, 12:54 PM #2
do you have a lid on your tank?
05-06-2013, 01:28 PM #3
I do yes, but it has open spot at the back .Allergic to all things furry.
05-06-2013, 01:33 PM #4
I'm assuming the mist is escaping through that open spot. cover it.
If you have the clear plastic that generally comes with the hood, attach it.
If not, I've used black duct tape to seal gaps. tear off two lengths, tape them together so there's only a stickie spot on each end and tape it to your hood. see if that doesn't help the problem.
05-06-2013, 02:22 PM #5
Get a smaller air pump.
Everything happens for a reason. Sometimes that reason is you are stupid and make bad decisions.
I think my fish is adjusting well to the four gallon, He's laying on his side attempting to go to sleep on the bottom of the gravel.
Imitation is the sincerest form of flattery.
Dear naps, sorry I hated you so much when I was a child... Love me
05-06-2013, 06:49 PM #6
I'll do the duct tape. I tried a smaller air pump and it wouldn't even make any bubbles. Thanks all.Allergic to all things furry.