Results 1 to 4 of 4
Thread: how much sand do I need?!?
02-28-2013, 10:35 AM #1
how much sand do I need?!?
I have a 100L/26g tank, dimensions: 66cmX39cmX48cm/26inX16inX19in (LXWXH).
How much sand do i need to adequately cover the tank bottom??
02-28-2013, 10:52 AM #2
That depends on your objectives - if to just cover the bottom, very little, maybe an inch at most. For plants, at least two inches and somewhat deeper in the back to give a slope effect; and to create a bio-processing very low oxygen nitrate absorber, three to four inches deep. These values all assume sand; gravel would be at least 50% greater for each case.
If you just mean bag weight to achieve some arbritary but useful depth, well, for a 26 gal tank, I'd guess between sixteen to twenty-five pounds.Knowledge is fun(damental)
A 75 gal with eight Discus, fake plants, and a lot of wood also with sand substrate. Clean up crew is down to just two Sterba's Corys. Filters: continuous new water flow; canister w/UV, in-tank algae scrubber!! Finally, junked the nitrate removal unit from hell.
For Fishless cycling:http://www.aquaticcommunity.com/aqua...ead.php?t=5640
02-28-2013, 11:59 AM #3
+1 to the above
I have about 1.5 inches in my tank with a moderate amount of plants which seam to work very well. If you don't want/plan on any plants, then I would suggest 3/4 to 1 inch to make routine maintenance a little easierIf you take your time to do the research FIRST, you can successfully set-up and keep ANY type of aquarium with ease.
"Not using a quarantine tank is like playing Russian roulette. Nobody wins the game, some people just get to play longer than others." - Anthony Calfo
Fishless Cycle Cycling with Fish Marine Aquarium Info [URL="http://saltwater.aquaticcommunity.com/"]
02-28-2013, 06:50 PM #4
Try this calculator
I agree with the others, you don't want the sand bed to be too thick.