Thread: Return Line Spray Head
02-15-2013, 08:59 PM #1
Return Line Spray Head
Things are coming together. I now have a question regarding the return line in the tank.The bulk head comes in appx 6" below the water line and the overflow box is directly above it.I was thinking of just coming out of the 3/4" bulkhead with a pvc tee allowing the water to disperse to the left and right. Is this ok or do I need to plumb it so that it is at the surface? I want to keep it as clean as possible. You can just see the black line where the bottom of the coast to coast is going to be.
55g Freshwater | Rena XP3 | Aqueon 55 | Hydor 300w Inline Heater|6 Black Skirt |5 Serpae Tetras |5 Red Eye Tetras | 3 Otto Cats | Planted | STS Substrate
72g Bowfront | Custom Built Coast to Coast Overflow and 20g Sump | 250w Aqueon Pro Heater | Planted | STS Substrate | 3 Zebra Danios | 3 Cardinal Tetras | 2 Veil Angels | 3 Otto Cats
02-15-2013, 09:08 PM #2
Plumb it so it is at the surface. Keep in mind that if your return pump stops working, you will also get drain back into the sump from the return line as well.
I like using line lock fittings and lines to direct the flow from the return line to the direction and hight that I want. Just position it up and over the overflow to the direction and depth you want. You can always add a powerhead to keep the water moving from the tank into the drain line / overflow.
Last edited by Cliff; 02-15-2013 at 09:14 PM.If you take your time to do the research FIRST, you can successfully set-up and keep ANY type of aquarium with ease.
"Not using a quarantine tank is like playing Russian roulette. Nobody wins the game, some people just get to play longer than others." - Anthony Calfo
Fishless Cycle Cycling with Fish Marine Aquarium Info [URL="http://saltwater.aquaticcommunity.com/"]