Results 11 to 19 of 19
Thread: algae in new tank
02-14-2013, 03:40 AM #11
that isn't bad news, the tank is empty. you could fill it up with pure bleach if you wish.
as long as you do the following to make sure the chemicals are gone, you have 0 things to worry about.
rinse it out a few times (either with water or vinegar+water mix)
scrub it down
let it dry
repeat if you wish
02-14-2013, 03:44 AM #12
thanks for the huge relief,
tommorow i am going to rinse it out many times with my garden house and buy some gravel for it to start the cycle.
so no to the 90 gph filter?
because a ac 20= 100 gph.
i could add another 20 gph with a 1-3 gallon filter
02-14-2013, 11:18 PM #13
02-15-2013, 02:47 AM #14
do guys think im trolling you guys again
02-15-2013, 04:27 PM #15
If I add another 20 GPh to my 90 I am good right
02-15-2013, 04:33 PM #16Senior Member Red tailed catfish
- Join Date
- Dec 2010
Make sure your filtration is for double the size of your tank - you have a 10gal tank - filtration should be for AT LEAST 20gal. It doesn't matter if you upgrade your filter or add another one.
02-15-2013, 11:16 PM #17
I understand that,
But an ac 20 is 100 gph
The filters I have would combine to 110 gph.
The filters I have would be more powerful.
I am going to stay with the filters I have
02-15-2013, 11:34 PM #18
02-15-2013, 11:34 PM #19
For a ten gallon tank I would get an AC 50. Once your filter gets a bit dirty it will really reduce it's efficiency. Spec's. for an AC 50 are;
For 20 - 50 U.S. Gal aquariums
- Maximum Output: 757 L/h (200 U.S. Gal./h)
- Full Flow Control: 250 L/h (66 U.S. Gal./h)
That would be my minimum. But thats me. Good luck.Warning; Bulldog Pleco guarding my Sons tank now..
Please remember; every keystroke has a consequence.