Results 1 to 10 of 42
Thread: my in wall 220g tank makeover
02-11-2013, 09:24 PM #1
my in wall 220g tank makeover
It has been suggested that I start a journal on my tank makeover. So here it is.....
To start I have been keeping fish of one type or another since the mid 1980's. I have kept south american cichlids , Oscars, pirhana, African cichlids, many different catfishes and my latest tank houses north American native game fish( green sunfish,redear sunfish,bluegill,channel catfish, small mouth bass and pumkinseed sunfish) .
I am in the process of re-homing or relocating my current stock. If I don't find a suitable home they will be moved to my garden pond.
The plan is to change my 220g in wall setup from the north American natives to some type of smaller community fishes. My first hurdle is heating this tank as the current set up doesn't require any heating. One of the difficulties is that the tank is actually in an unheated garage, well,semi heated. The temp in the garage rarely gets below 40°f in the winter even when it is much colder outside.
After pricing some of the high wattage heaters I have decided to build my own using electric water heater elements and two redundant temperature controllers.I plan on putting the heaters in the sump.
So far I have run a new 20amp dedicated circuit to my tank to accommodate the added draw of the heating system as the tank now is on a shared 15amp circuit. I have a rough plan on the heating and will be starting that this week.
I will post more as the project proceeds
02-11-2013, 09:44 PM #2
I for one will be following this thread with great interest. Sounds pretty cool.><((((º> ><((((º> ><((((º> ><((((º>
NEW MEMBERS LOOK HERE:
My Tank Channel:
02-11-2013, 09:49 PM #3
02-11-2013, 09:57 PM #4
02-11-2013, 10:08 PM #5
02-11-2013, 10:35 PM #6
To better insulate the tank and cut down on the electric bill, just build a frame using right-angle aluminum stock and use that ultra-thin clear shrink plastic for windows. Fit this into the open frame the aquarium sits in. After shrinking with a air-dryer, that stuff is as clear as glass (almost invisible unless you look carefully.) With a one inch or so space between the plastic film and aquarium, the heat lost on the tank will be reduced by 50% or more. I made these for every window in my house and did cut my heat bill in half.Knowledge is fun(damental)
A 75 gal with eight Discus, fake plants, and a lot of wood also with sand substrate. Clean up crew is down to just two Sterba's Corys. Filters: continuous new water flow; canister w/UV, in-tank algae scrubber!! Finally, junked the nitrate removal unit from hell.
For Fishless cycling:http://www.aquaticcommunity.com/aqua...ead.php?t=5640
02-11-2013, 10:49 PM #7
02-11-2013, 10:53 PM #8
02-17-2013, 12:39 AM #9
.... today I purchased my materials for my diy heating system. Some PVC fittings, a water heater element(1500w120vac),I also ordered the controller. In total I will have about $30 invested. I think I should see the controller by Wednesday.
I will probably do a write up on it in the diy section if everything works out OK.....as well as continuing this thread on the whole project.
I also purchased some rigid foam insulation. My plan is to insulate the sump area and also the top of the tank.
I will keep you all updated on progress as it comes. And pics as well. Scott.
02-17-2013, 12:42 AM #10
I would love to see pics of this as your set-up comes together
If I can not have such a set-up, at least I can enjoy yoursIf you take your time to do the research FIRST, you can successfully set-up and keep ANY type of aquarium with ease.
"Not using a quarantine tank is like playing Russian roulette. Nobody wins the game, some people just get to play longer than others." - Anthony Calfo
Fishless Cycle Cycling with Fish Marine Aquarium Info [URL="http://saltwater.aquaticcommunity.com/"]