Results 1 to 10 of 55
Thread: cycling problem
12-31-2012, 12:42 AM #1
so i have a 1.5 gallon tank
it has a 3i tetra whisper filter
i have been trying to cycle it for a month or so
its readings are
ammonia: .50 ppm
nitrite: im not sure but it look like 0
i will take a pic of the nitrite reading asap
why is it taking forever to cycle this
im thinking of adding tetra safe start
12-31-2012, 12:50 AM #2
This is fishless?
What are you going to stock it with?Gas mileage isn't everything OIIIIIIIO
Lack of planning on your part does not constitute an emergency on my part.
Why pretend there are no stupid questions? Actually, There are many stupid questions: "Should I drink this bleach?" Is just one example.
Having said that, Just because it's a stupid question doesn't mean that it shouldn't be asked. It's better to know.
A warm beer is better than a cold beer. Because nothing is better than a cold beer, and a warm beer is better than nothing.
12-31-2012, 12:51 AM #3
fishless and some shrimp
12-31-2012, 12:53 AM #4
the pic is attached
12-31-2012, 01:08 AM #5
Maybe have a LFS test it for you. I have always found it was easier to get a good accurate reading when viewing in person rather than looking at a pic. I posted a pic of a test result once and thought the color in the pic was a little different than the colors in real life
Also, have you cleaned the tank/filter or done anything like that ?If you take your time to do the research FIRST, you can successfully set-up and keep ANY type of aquarium with ease.
"Not using a quarantine tank is like playing Russian roulette. Nobody wins the game, some people just get to play longer than others." - Anthony Calfo
Fishless Cycle Cycling with Fish Marine Aquarium Info [URL="http://saltwater.aquaticcommunity.com/"]
12-31-2012, 01:13 AM #6
i didn't touch the filter or tank
12-31-2012, 01:58 AM #7
what media do you have in the filter ?
what is your PH reading as a cycle can stall if it is much below 6.4
Are you using de-chlor with your water ?
dont forget to check the PH of your tap too1) 140 gallon with 70 gallon sump. 1 German Rams, 50 neons , 16 Schwarzi cory, 10 harlequin rasbora, 6 Hengals Rasbora, 2 Bulldog Plecs, 4x dwarf Gouramis, 12 golden barbs, 12 cherry barbs,8 Yellow Boesemani Rainbows and loads of assasin snails. Sump has central heating pump. water flows through a 4 layer foam and 1- 2kg of bio, also has a 18"x 18" algae scrubber that works well. fluval U2 to transfer to my QT when needed
01-01-2013, 09:20 PM #8
the ph is 7.6 so that is not a problem
so what about tetra safestart
i was thinking of dumping that stuff in until ammonia reaches 0
and then adding the shrimp
oh ya btw i don't have a heater in there yet is that ok
thanks in advance
01-01-2013, 09:27 PM #9
I would not use the safe start but stick with ammonia.
What did you dose it to originally?
and as someone asked - what media do you have in your filter?
Heat will help a fishless cycle along so if you plan on heating the tank, I'd get one and set it around 82F30 g FW planted:corys, female ABNP, blue angel, harleys, zebra danios, rummies, mystery & assassin snails
15 g FW planted:2 male guppies, neons, pygmy corys, clown pleco, 4 types of shrimp, mystery & assassin snails
90 g FW planted:congos, rainbows, roseline sharks, kribs, male ABNP, peppered cories, assassin snailss
90 Gal Journal: http://bit.ly/1vC7gVX
fishless cycling: http://bit.ly/1DARf3T
fish in cycling: http://bit.ly/1ILvcfp
01-01-2013, 10:09 PM #10
It's a tetra small bio bag