what type of filter is this?

[tallenskinny]

i got it free, and the top part is removable any ideas?

[Oscar_freak12321]

Looks like an in-tank to me, not sure what brand.

[tallenskinny]

i got it free with a 55 gallon, i was looking for some sort of brand name or something for i can change the cartridge in it, but i cant find a serial number or anything

[Oscar_freak12321]

Hmm...very strange, usually there's a brand on the part itself...have you tried it out yet? Is it a fully working filter?

[tallenskinny]

ya it works fine, the cartridges are dirty though

[little hawaii]

i got it free, and the top part is removable any ideas?


Powerhead and synthetic sponge looks like:18: :fish: :fish: :18:

[annageckos]

Just rinse the cartridge under water. As long as the water flows through it it will be fine. You shouldn't need to replace it till it is falling apart.

[aspects]

looks like a larger version of the dive clean line of filters.
basically its just a powerhead with a quick filter attachment.

[tallenskinny]

okay thanks, one of the filters cartridges are falling apart, i wonder how im going to replace it..

[toddnbecka]

Post a couple pics of the inside of the housing and the filter media that needs replaced, and I'm sure I can come up with a solution.

[lowlight]

I agree with aspects. Looks like a powerhead with a quick filter. Some pics of the inside of the cartridge would be helpful.

[Wild Turkey]

I agree thats a powerhead on the left, what kind of media is in the media boxes? Stuffing it with cut to fit foam/sponge would make a very powerful sponge filter if Im looking at it right ; (rotated 90 degrees to the right is upright)

[Crispy]

Definitely a good sponge filter, but should not be the only filter on your tank. Will create good water current, so keep that in mind. Rinse the sponge frequently for best flow.

[tallenskinny]

Definitely a good sponge filter, but should not be the only filter on your tank. Will create good water current, so keep that in mind. Rinse the sponge frequently for best flow.

ya i also have a Marineland Penguin 350B for my 55 gallon and this, i think that would be enough?





and here is a pic of the stuff inside

[Taurus]

Internal filter with sponge media. Just squeeze the sponge out in used tank water until the sponge is free of crap. Do NOT use chlorinated water.

[tallenskinny]

Internal filter with sponge media. Just squeeze the sponge out in used tank water until the sponge is free of crap. Do NOT use chlorinated water.

okay, and what should i do about one of the sponges that is basically falling apart? try to make another one?

[Taurus]

You could try using an Aquaclear Sponge and cutting away the sponge material won't fit. Are you sure there isn't a brand name on that interanl filter anywhere? If you can find a name, you could order a replacement sponge designed to fit that specific filter.

But in a pinch, I think carving out an Aquaclear Sponge to fit would work. It's either on of those two options or get rid of the internal filter\powerhead all together.

[tallenskinny]

okay well i try to get an Aquaclear Sponge and carve one at, im excited gunna get a stand today and get my 55 up and running

[Taurus]

Maybe I'm wrong, but that internal looks like an older hagen fluval internal. Maybe one of the sponges for a fluval interanl would work. Anway, I'm fairly certain you can make an Aquaclear sponge work if you cut it out carefully.

Use an exacto knife\blade to make your cuts.

[aspects]

now that you mention it, it does look like it could be an older version of the fluval3.


little tip i picked up over the years.
if you need to cut a big AC110 sponge to fit another filter...

freeze it first

once its frozen, you can easily cut it with a kitchen knife.
nice straight cuts, and no squishing.

[tallenskinny]

freeze it first

once its frozen, you can easily cut it with a kitchen knife.
nice straight cuts, and no squishing.

ok, thats sounds good to do lol