travie
04-12-2008, 02:47 AM
I've encountered a new problem with my overflow setup. I got the issue of fish-proof and current that it made fixed. New problem is that the outflow from the overflow in my 10g creates way too bubbles on the surface and way too many micro bubbles in the water. Also too much surface agitation, since I have plants in the tank. I'm at a lose for what to do about the micro bubbles and bubbles on the surface. Any suggestions, would most likely be tried till one works. Thank you
Tip: If you have an overflow box that you don't want fish to accidently get into, use a breeder net around the box. Its working for me and the overflow is staying up the task.
EDIT: I should have said how I have it setup. Its flex tubing down to a plastic T. Then flex tubing out with holes drilled in a straight line with the ends still open. The drilled holes can be directed in any direction, like up or down.
Tip: If you have an overflow box that you don't want fish to accidently get into, use a breeder net around the box. Its working for me and the overflow is staying up the task.
EDIT: I should have said how I have it setup. Its flex tubing down to a plastic T. Then flex tubing out with holes drilled in a straight line with the ends still open. The drilled holes can be directed in any direction, like up or down.